Hi David,
I ran into a similar problem a few weeks ago. Are you using the latest K3
Utility? Try using the manual calibration procedure in the K3 Manual. Does
that work? I had a similar problem that was related to an updated that the
K3 Utility needed. I think the latest K3 Utility is on the web site now
though.
Good luck.
73 de Al, KE1FO
K3 #3055
K3 #4094
-----
Check out my Amateur Radio Contesting blog at ke1fo.wordpress.com.
On Sat, Apr 17, 2010 at 10:49 AM, David Quental <
[hidden email]> wrote:
> Hello a
>
> since yesterday I am at my home and have begun to assemble my Elecraft
> K3. All went fine until I have reached the ERR TXG problem. When I use
> the Elecraft K3 Utility I get always the same:
>
> Starting 5 watt calibration.
> Calibrating at 1,900 MHz
> Calibration power settled at ' 0.0 W ;'
> 5 watt calibration failed.
> Elapsed time: 8,9 secs
>
> Any help will be welcome, tks in advance.
>
> CT1DRB
> David Quental
>
> ______________________________________________________________
> Elecraft mailing list
> Home:
http://mailman.qth.net/mailman/listinfo/elecraft> Help:
http://mailman.qth.net/mmfaq.htm> Post: mailto:
[hidden email]
>
> This list hosted by:
http://www.qsl.net> Please help support this email list:
http://www.qsl.net/donate.html>
______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.html