Jerry and all,
There are a few soldering stations that have isolated tips (they also
say they are ESD safe) that can be used when working on live circuits.
The Solomon soldering station that I have is an isolated tip.
73,
Don W3FPR
Jeremiah McCarthy wrote:
> Until retirement in 1993, I worked for 35 years soldering in the aerospace industry...In every soldering station and straight soldering iron I ever encountered that had a 3 prong AC connector, the soldering tip was connected directly to house ground...I have an old Weller WTCP, a Hakko 936, an old Pace, and several straight soldering irons with 3 prong plugs and they all have tips grounded directly to house ground...The Hakko 808 desoldering tool has a grounded tip...Most soldering handles and the wire for them are made of static dissipating plastic to help drain any charge on the operator's body...It would be next to impossible to use one of these tools and not accidently touch the chassis or ground plane with it at one time or another...Grounding the work mat and the wrist strap through a 1 meg resistor is normal, but not the soldering tip...Some mats have a ring on the end of the ground wire that you slip over the round ground prong on the AC plug before you plug the solde
> ring iron in...
>
>
_______________________________________________
Elecraft mailing list
Post to:
[hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/subscribers.htmElecraft web page:
http://www.elecraft.com
Locked
