ESTATE SALE: K2 with options & KPA100 +KAT100 in EC2 Enclosure

[James kvochick]

Estate radio for sale:

K2 Transceiver (serial number in 58xx range)

Transceiver includes:

KSB2 SSB Module
K160RX 160 Module
KNB2 Noise Blanker
KAF2 Audio Filter
KAT2 20 Watt Tuner
KIO2 Serial Port
Kenwood Microphone
Rework Modules

KPA100 & KAT100 (100 Watt Amplifier and 100 Watt Tuner) Built in an EC2 enclosure
(includes serial cable to connect to K2

All manuals

I’ve had the station on the air, and despite the frequency display being a little off (probably needs an alignment) everything seems to work great.  I do not know who built the K2, but it looks very nice inside.  The KPA100/KAT100 combination was purchased by me used from another Elecraft enthusiast, and donated to the SK.

IF SOLD SEPARATE:

$800 US for the K2
$700 US for the KPA100/KAT100

plus shipping for each.

IF SOLD TOGETHER:

Complete collection for $1100.00  FREE SHIPPING

73

Jim K8JK

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

[vk2rq]

The frequency display alignment is easy enough to do, there is good information about this on the webpage of Don W3FPR:
http://www.w3fpr.com/dial_cal.html

I recommend the "N6KR" method which is linked on that page -- tune in WWV either zero-beating against a second AM shortwave receiver, or use spectrogram to see the frequency of the WWV tones, then use the N6KR method to align the VCO/BFO. With a bit of care, you can get the dial showing the right frequency to within 20Hz.

73,
Matt VK2RQ

> On 29 Mar 2015, at 11:31 am, James kvochick <[hidden email]> wrote:
>
>
> Estate radio for sale:
>
> K2 Transceiver (serial number in 58xx range)
>
> Transceiver includes:
>
> KSB2 SSB Module
> K160RX 160 Module
> KNB2 Noise Blanker
> KAF2 Audio Filter
> KAT2 20 Watt Tuner
> KIO2 Serial Port
> Kenwood Microphone
> Rework Modules
>
> KPA100 & KAT100 (100 Watt Amplifier and 100 Watt Tuner) Built in an EC2 enclosure
> (includes serial cable to connect to K2
>
> All manuals
>
> I’ve had the station on the air, and despite the frequency display being a little off (probably needs an alignment) everything seems to work great.  I do not know who built the K2, but it looks very nice inside.  The KPA100/KAT100 combination was purchased by me used from another Elecraft enthusiast, and donated to the SK.
>
> IF SOLD SEPARATE:
>
> $800 US for the K2
> $700 US for the KPA100/KAT100
>
> plus shipping for each.
>
> IF SOLD TOGETHER:
>
> Complete collection for $1100.00  FREE SHIPPING
>
> 73
>
> Jim K8JK
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to [hidden email]

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]