John,
It is the operating system, not the divice, that determines the RS232 port assigned.
You can change the port number assigned by opening Device Manager and selecting ports. Right click the serial port you want to change and go to Properties. in Properties go to Port Settings then click the Advanced button. in the lower right or that window is the port number. you can change it to whatever you like as long as the port number you choose is not already assigned. Afterward you have to setup your software to the new port setting.
73
Dave KD1NA
Does anyone know the nature of the K3 USB -> COMM adapter sold by
Elecraft? I cannot find anything in the Elecraft literature about it
(other than the price, of course). For example:
Does it come with a pre-defined COMM port number?
A settable COMM port number between 1 and 10?
A settable COMM port number which may be anything (e.g. 17 or 25 or...).
How do driver software programs/suites such as DigiPan, FLDIGI, HRDeluxe
recognize this adapter (if at all)? [Some software will not recognize
ports above 10, while other programs are more relaxed about such things.]
Can the adapter be used for CAT control?
Any information would be useful.
John Ragle -- W1ZI
______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.html
Locked
