Rudi...
I recently returned my new K144XV (Internal 2 meter transverter) to
Elecraft with the same problem...the transverter was (diagnosed by
Elecraft to be) self-oscillating and therefore producing drive to the
amp even though no audio was going in... It sounds to me that you have
the same problem.
My solution was to replace the internal transverter with the
external (kit) version XV144. This solution is somewhat unsatisfactory,
in that it adds yet another pendant device to the K3, but the
transverter works very nicely. The kit required a mod, provided at no
cost by Elecraft, to draw the LO crystal on frequency. I described this
in an earlier post.
John Ragle -- W1ZI
=====
On 2/18/2011 12:02 PM, Rudi wrote:
Hello FM,
I have a K3 with internal VHF transverter, assembled by factory.
When I key (PTT) my K3 in USB on VHF with my amplifier my power supply is
reading 45 amp even when I have no modulation in USB.
When I do the same on HF, no meter reading only when I modulate in my
microphone.
Whats wrong, all info welcome.
73 - Rudi - ON7CL
______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.html
Locked
