Elecraft K3 or KX3 Utillity Functional with LPBridge

[Doug Ellmore Sr.]

Has anyone been able to run LPBridge for NaP3 and also run the Elecraft K3
or KX3 utility?

I am trying to send K3/KX3 commands through the virtual part to keyer.

73,

--
Doug Ellmore, Sr.
[hidden email] / www.ellmore.net
Amateur Radio Operator: NA1DX / P40DE
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

[Don Wilhelm-4]

Doug,

If you look at the LP Bridge information, it specifically says that
firmware downloads should *not* be attempted through LP Bridge.
There may be other limitations too.
So the answer is - do not try that.  If the particular Utility function
you want works, that is fine, but if it does not, there are no
guarantees - the solution is to connect direct.

73,
Don W3FPR

On 4/6/2014 6:50 PM, Doug Ellmore Sr. wrote:
> Has anyone been able to run LPBridge for NaP3 and also run the Elecraft K3
> or KX3 utility?
>
> I am trying to send K3/KX3 commands through the virtual part to keyer.
>
> 73,
>

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]