Elecraft K4 Operating Manual

[Elecraft mailing list]

For those of us that like to sit in a comfortable chair and read a printed version of the Manual, is it possible to post a black on white version?  It would save a great deal of black ink?

73
Elliott WA6TLA


______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

[Elecraft mailing list]

Found the solution in my printer options.  Sorry for the noise!
73
Elliott WA6TLA

> On Jan 26, 2021, at 8:34 PM, Elliott Lawrence <[hidden email]> wrote:
>
> For those of us that like to sit in a comfortable chair and read a printed version of the Manual, is it possible to post a black on white version?  It would save a great deal of black ink?
>
> 73
> Elliott WA6TLA
>
>

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

[Bill Steffey NY9H]

i am very rarely on 10 mHz,


while running tx gain set , the calibration fails at 10mhz due to

   SWR 3.3-1 TOO HIGH FOR CALIBRATION.


checking other bands..160- 6 all read low swr


lp-100 & WATERS swr/load  read low swr .....   hi swr  just reads on
radio & faults the tx gain procedure ????


ideas ???


bill


--
This email has been checked for viruses by Avast antivirus software.
https://www.avast.com/antivirus

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

[AB1DD]

Bill,

What radio? Is the RF gain cal. OK (assuming a K3)?

What is the SWR on the radio into the dummy load without trying to do
the calibration, I.E. direct? Don't know for sure that is what you meant.

You can try to do it manually, just on the 10 Mhz band. Then run the
whole thing to see if it works, if you want.

Carl
AB1DD

Resistance is futile.
(don't know about reactance, though)


On 1/28/2021 10:50 AM, Bill Steffey NY9H wrote:

> i am very rarely on 10 mHz,
>
>
> while running tx gain set , the calibration fails at 10mhz due to
>
>   SWR 3.3-1 TOO HIGH FOR CALIBRATION.
>
>
> checking other bands..160- 6 all read low swr
>
>
> lp-100 & WATERS swr/load  read low swr .....   hi swr  just reads on
> radio & faults the tx gain procedure ????
>
>
> ideas ???
>
>
> bill
>
>

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

[Bill Steffey NY9H]

disregard .....   something is amiss in the lines...

time to get out the drawings...

stay well


On 1/28/2021 10:50 AM, Bill Steffey NY9H wrote:
> i am very rarely on 10 mHz,
>

--
This email has been checked for viruses by Avast antivirus software.
https://www.avast.com/antivirus

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]