Elecraft K4?
Locked
123
123
 
|
The Swiss brochure says it's 2" wider than a K3. Also, the no-solder kit
version will come later. 73, Drew AF2Z On 05/16/19 15:36, Dick Dickinson wrote: > Price of K4..? > > As a starting point, consider the "Spring Special" on the K3s/100-F - DX'er > Package (Dual RX, 100W ATU, Hand Mic, Filters, P3, Hat!) > $5,404.95 ($250 Discount) > > I still have access to the K4 page (separate tab) on Elecraft.com. I've > noticed no mention of 'kit,' though the enclosure looks to be along the > lines of the K3 as far as it's construction. > > 73, > Dick - KA5KKT > ---------------------------------------------------------------------------- > --------------------- > > I did not see a price on the Elecraft site, just the deposit amounts. Does > anyone know the price or a ball park figure? > > phil, K7PEH > > > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[hidden email] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html |
|
|
In reply to this post by Dick Dickinson
I thought I read that a “modular kit” may be available later. Preassembled modules that just plug in, pre-tested and pre-aligned. Guess we’ll know tomorrow.
Don, KE0PVQ K2 SERIAL $7818 Sent from Mail<https://go.microsoft.com/fwlink/?LinkId=550986> for Windows 10 From: Dick Dickinson<mailto:[hidden email]> Sent: Thursday, May 16, 2019 2:37 PM To: [hidden email]<mailto:[hidden email]> Subject: Re: [Elecraft] Elecraft K4? Price of K4..? As a starting point, consider the "Spring Special" on the K3s/100-F - DX'er Package (Dual RX, 100W ATU, Hand Mic, Filters, P3, Hat!) $5,404.95 ($250 Discount) I still have access to the K4 page (separate tab) on Elecraft.com. I've noticed no mention of 'kit,' though the enclosure looks to be along the lines of the K3 as far as it's construction. 73, Dick - KA5KKT ---------------------------------------------------------------------------- --------------------- I did not see a price on the Elecraft site, just the deposit amounts. Does anyone know the price or a ball park figure? phil, K7PEH ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html |
|
|
In reply to this post by Drew AF2Z
Like fine wine, it needs to properly age.
Bob, K4TAX Sent from my iPhone > On May 16, 2019, at 2:45 PM, Drew AF2Z <[hidden email]> wrote: > > The Swiss brochure says it's 2" wider than a K3. Also, the no-solder kit version will come later. > > 73, > Drew > AF2Z > > >> On 05/16/19 15:36, Dick Dickinson wrote: >> Price of K4..? >> As a starting point, consider the "Spring Special" on the K3s/100-F - DX'er >> Package (Dual RX, 100W ATU, Hand Mic, Filters, P3, Hat!) >> $5,404.95 ($250 Discount) >> I still have access to the K4 page (separate tab) on Elecraft.com. I've >> noticed no mention of 'kit,' though the enclosure looks to be along the >> lines of the K3 as far as it's construction. >> 73, >> Dick - KA5KKT >> ---------------------------------------------------------------------------- >> --------------------- >> I did not see a price on the Elecraft site, just the deposit amounts. Does >> anyone know the price or a ball park figure? >> phil, K7PEH >> ______________________________________________________________ >> Elecraft mailing list >> Home: http://mailman.qth.net/mailman/listinfo/elecraft >> Help: http://mailman.qth.net/mmfaq.htm >> Post: mailto:[hidden email] >> This list hosted by: http://www.qsl.net >> Please help support this email list: http://www.qsl.net/donate.html > > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[hidden email] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html |
|
|
In reply to this post by Drew AF2Z
Actually, it is 2.75 inches wider, 0.5 inches higher and same depth 10 inches as the K3S (not including knobs and connectors on back panel).
I measured the dimensions on the brochure against my K3S. Mark, WB9CIF -----Original Message----- From: [hidden email] <[hidden email]> On Behalf Of Drew AF2Z Sent: Thursday, May 16, 2019 19:46 To: [hidden email] Subject: Re: [Elecraft] Elecraft K4? The Swiss brochure says it's 2" wider than a K3. Also, the no-solder kit version will come later. 73, Drew AF2Z On 05/16/19 15:36, Dick Dickinson wrote: > Price of K4..? > > As a starting point, consider the "Spring Special" on the K3s/100-F - > DX'er Package (Dual RX, 100W ATU, Hand Mic, Filters, P3, Hat!) > $5,404.95 ($250 Discount) > > I still have access to the K4 page (separate tab) on Elecraft.com. > I've noticed no mention of 'kit,' though the enclosure looks to be > along the lines of the K3 as far as it's construction. > > 73, > Dick - KA5KKT > ---------------------------------------------------------------------- > ------ > --------------------- > > I did not see a price on the Elecraft site, just the deposit amounts. > Does anyone know the price or a ball park figure? > > phil, K7PEH > > > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[hidden email] > > This list hosted by: http://www.qsl.net Please help support this email > list: http://www.qsl.net/donate.html > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html |
|
|
In reply to this post by Bob McGraw - K4TAX
The kit is worth the wait-- better fun/$ ratio.
73, Drew AF2Z On 05/16/19 15:48, Bob McGraw K4TAX wrote: > Like fine wine, it needs to properly age. > > Bob, K4TAX > > > Sent from my iPhone > >> On May 16, 2019, at 2:45 PM, Drew AF2Z <[hidden email]> wrote: >> >> The Swiss brochure says it's 2" wider than a K3. Also, the no-solder kit version will come later. >> >> 73, >> Drew >> AF2Z >> >> >>> On 05/16/19 15:36, Dick Dickinson wrote: >>> Price of K4..? >>> As a starting point, consider the "Spring Special" on the K3s/100-F - DX'er >>> Package (Dual RX, 100W ATU, Hand Mic, Filters, P3, Hat!) >>> $5,404.95 ($250 Discount) >>> I still have access to the K4 page (separate tab) on Elecraft.com. I've >>> noticed no mention of 'kit,' though the enclosure looks to be along the >>> lines of the K3 as far as it's construction. >>> 73, >>> Dick - KA5KKT >>> ---------------------------------------------------------------------------- >>> --------------------- >>> I did not see a price on the Elecraft site, just the deposit amounts. Does >>> anyone know the price or a ball park figure? >>> phil, K7PEH >>> ______________________________________________________________ >>> Elecraft mailing list >>> Home: http://mailman.qth.net/mailman/listinfo/elecraft >>> Help: http://mailman.qth.net/mmfaq.htm >>> Post: mailto:[hidden email] >>> This list hosted by: http://www.qsl.net >>> Please help support this email list: http://www.qsl.net/donate.html >> >> ______________________________________________________________ >> Elecraft mailing list >> Home: http://mailman.qth.net/mailman/listinfo/elecraft >> Help: http://mailman.qth.net/mmfaq.htm >> Post: mailto:[hidden email] >> >> This list hosted by: http://www.qsl.net >> Please help support this email list: http://www.qsl.net/donate.html >> > > > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html |
|
Administrator
|
In reply to this post by Mark Musick
> On May 16, 2019, at 2:52 PM, Mark Musick <[hidden email]> wrote: > > Actually, it is 2.75 inches wider, 0.5 inches higher and same depth 10 inches as the K3S (not including knobs and connectors on back panel). I measured the dimensions on the brochure against my K3S. > > Mark, WB9CIF Darn close, Mark. Wayne ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html |
|
|
In reply to this post by Russ W9RB
Looks pretty sweet! Wayne dropped enough hints the other day that I
wished I could make Dayton (Xenia). Oh, well! 73, Nate -- "The optimist proclaims that we live in the best of all possible worlds. The pessimist fears this is true." Web: http://www.n0nb.us GPG key: D55A8819 GitHub: N0NB ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html |
|
|
In reply to this post by wayne burdick
No need for separate P3 so overall station smaller. Assumd large VDU can still be used for spsctrum display.Thank God, I booked Friedricshafen.Sent from my Samsung Galaxy smartphone.
-------- Original message --------From: Wayne Burdick <[hidden email]> Date: 16/05/2019 16:00 (GMT-05:00) To: Mark Musick <[hidden email]> Cc: [hidden email] Subject: Re: [Elecraft] Elecraft K4? > On May 16, 2019, at 2:52 PM, Mark Musick <[hidden email]> wrote:> > Actually, it is 2.75 inches wider, 0.5 inches higher and same depth 10 inches as the K3S (not including knobs and connectors on back panel). I measured the dimensions on the brochure against my K3S.> > Mark, WB9CIFDarn close, Mark.Wayne ______________________________________________________________Elecraft mailing listHome: http://mailman.qth.net/mailman/listinfo/elecraftHelp: http://mailman.qth.net/mmfaq.htmPost: mailto:[hidden email] list hosted by: http://www.qsl.netPlease help support this email list: http://www.qsl.net/donate.html ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html |
|
Administrator
|
turnbull <[hidden email]> wrote:
> > No need for separate P3 so overall station smaller. Yes, by about 4” (horizontal). > Assumd large VDU can still be used for spsctrum display. Yes. Standard. W ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html |
|
|
I am a customer, I hope CE does not take so long as for KPA 1500. My amp shipped yesterday. 73 Doug EI2CNSent from my Samsung Galaxy smartphone.
-------- Original message --------From: Wayne Burdick <[hidden email]> Date: 16/05/2019 16:15 (GMT-05:00) To: turnbull <[hidden email]> Cc: Mark Musick <[hidden email]>, [hidden email] Subject: Re: [Elecraft] Elecraft K4? turnbull <[hidden email]> wrote:> > No need for separate P3 so overall station smaller. Yes, by about 4” (horizontal). > Assumd large VDU can still be used for spsctrum display.Yes. Standard. W ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html |
|
|
In reply to this post by wayne burdick
Wayne,
I see a TX SAMPLE IN connector on the back. I assume that means we can hook this to the TX SAMPLE on the KPA1500 for predistortion? I also, assume there will be a mod for the KPA1500 for this or is it already in the KPA1500? Mark, WB9CIF -----Original Message----- From: Wayne Burdick <[hidden email]> Sent: Thursday, May 16, 2019 20:01 To: Mark Musick <[hidden email]> Cc: [hidden email]; [hidden email] Subject: Re: [Elecraft] Elecraft K4? > On May 16, 2019, at 2:52 PM, Mark Musick <[hidden email]> wrote: > > Actually, it is 2.75 inches wider, 0.5 inches higher and same depth 10 inches as the K3S (not including knobs and connectors on back panel). I measured the dimensions on the brochure against my K3S. > > Mark, WB9CIF Darn close, Mark. Wayne ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html |
|
|
In reply to this post by wayne burdick
You have to know know that the 50lb bigger-than-a-breadbox (radios that come with caster wheels instead of a carrying handle) guys aren’t going to be happy … :-)
Grant NQ5T K3 #2091 KX3 #8342 > On May 16, 2019, at 4:15 PM, Wayne Burdick <[hidden email]> wrote: > > turnbull <[hidden email]> wrote: >> >> No need for separate P3 so overall station smaller. > > Yes, by about 4” (horizontal). > > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html |
|
|
In reply to this post by wayne burdick
Will it be possible to plug a standard keyboard into the USB socket for
sending CW? 73, Drew AF2Z On 05/16/19 16:15, Wayne Burdick wrote: > turnbull <[hidden email]> wrote: >> >> No need for separate P3 so overall station smaller. > > Yes, by about 4” (horizontal). > > >> Assumd large VDU can still be used for spsctrum display. > > Yes. Standard. > > W > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[hidden email] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html |
|
Administrator
|
> On May 16, 2019, at 3:25 PM, Drew AF2Z <[hidden email]> wrote: > > Will it be possible to plug a standard keyboard into the USB socket for sending CW? Yes. Total of 3 USB-A jacks for keyboard / mouse / K-pod, etc. Wayne ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html |
|
|
In reply to this post by Mark Musick
Since it's another 12V radio, let's hope it's built into the barefoot radio too.
Wes N7WS On 5/16/2019 1:18 PM, Mark Musick wrote: > Wayne, > I see a TX SAMPLE IN connector on the back. I assume that means we can hook this to the TX SAMPLE on the KPA1500 for predistortion? > I also, assume there will be a mod for the KPA1500 for this or is it already in the KPA1500? > > Mark, WB9CIF > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html |
|
|
In reply to this post by wayne burdick
My my, all our brain storming is all ready there. 73 Doug EI2CNSent from my Samsung Galaxy smartphone.
-------- Original message --------From: Wayne Burdick <[hidden email]> Date: 16/05/2019 16:31 (GMT-05:00) To: [hidden email] Cc: [hidden email] Subject: Re: [Elecraft] Elecraft K4? > On May 16, 2019, at 3:25 PM, Drew AF2Z <[hidden email]> wrote:> > Will it be possible to plug a standard keyboard into the USB socket for sending CW?Yes. Total of 3 USB-A jacks for keyboard / mouse / K-pod, etc. Wayne______________________________________________________________Elecraft mailing listHome: http://mailman.qth.net/mailman/listinfo/elecraftHelp: http://mailman.qth.net/mmfaq.htmPost: mailto:[hidden email] list hosted by: http://www.qsl.netPlease help support this email list: http://www.qsl.net/donate.html ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html |
|
|
In reply to this post by Dick Dickinson
Print that page to a file...
73s and thanks, Dave (NK7Z) https://www.nk7z.net ARRL Technical Specialist ARRL Volunteer Examiner ARRL Asst. Director, NW Division, Technical Resource On 5/16/19 12:36 PM, Dick Dickinson wrote: > Price of K4..? > > As a starting point, consider the "Spring Special" on the K3s/100-F - DX'er > Package (Dual RX, 100W ATU, Hand Mic, Filters, P3, Hat!) > $5,404.95 ($250 Discount) > > I still have access to the K4 page (separate tab) on Elecraft.com. I've > noticed no mention of 'kit,' though the enclosure looks to be along the > lines of the K3 as far as it's construction. > > 73, > Dick - KA5KKT > ---------------------------------------------------------------------------- > --------------------- > > I did not see a price on the Elecraft site, just the deposit amounts. Does > anyone know the price or a ball park figure? > > phil, K7PEH > > > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[hidden email] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html |
|
|
In reply to this post by Frank Krozel
It IS in your buffer...
73s and thanks, Dave (NK7Z) https://www.nk7z.net ARRL Technical Specialist ARRL Volunteer Examiner ARRL Asst. Director, NW Division, Technical Resource On 5/16/19 10:56 AM, Frank Krozel wrote: > It IS on the Elecraft site > https://elecraft.com/products/k4-transceiver?fbclid=IwAR1ZvSRipjGHXFT4CeD5iYhFDj89Oa7ZYJ-1rV5u83e9UYHFdg9TDsceMbE > Frank KG9H > > >> On May 16, 2019, at 12:54 PM, David Box <[hidden email]> wrote: >> >> I googled Lutz electronics and did a translate of their web site. If this is a hoax there has been a lot of work put into it. Guess we need to standby for Dayton. >> >> <https://translate.google.com/translate?hl=en&sl=auto&tl=en&u=https%3A%2F%2Fwww.lutz-electronics.ch%2Fstationaer%2Famateurfunkgeraete%2Felecraft-k4%2F> >> >> de Dave K5MWR >> >> On 5/16/2019 11:51 AM, rboutell wrote: >>> Just going to leave this here: >>> https://www.lutz-electronics.ch/pdf/K4_Brochure-print_Lutz.pdf >>> Russ, W9RB >>> >>> >>> >>> ----- >>> 73, Russ - W9RB >>> -- >>> Sent from: http://elecraft.365791.n2.nabble.com/ >>> ______________________________________________________________ >>> Elecraft mailing list >>> Home: http://mailman.qth.net/mailman/listinfo/elecraft >>> Help: http://mailman.qth.net/mmfaq.htm >>> Post: mailto:[hidden email] >>> >>> This list hosted by: http://www.qsl.net >>> Please help support this email list: http://www.qsl.net/donate.html >>> >>> >> ______________________________________________________________ >> Elecraft mailing list >> Home: http://mailman.qth.net/mailman/listinfo/elecraft >> Help: http://mailman.qth.net/mmfaq.htm >> Post: mailto:[hidden email] >> >> This list hosted by: http://www.qsl.net >> Please help support this email list: http://www.qsl.net/donate.html > > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[hidden email] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html |
|
|
In reply to this post by Wes Stewart-2
Wes Stewart-2 wrote
> From the now inaccessible page: > > *"Kit version* > > A no-soldering kit version of the K4 is planned for later release. > <snip> I’m not patient, I don’t think I’ll be able to wait. Definitely going to slap a placeholder when permitted. Looks like another winner from Elecraft. Unfortunately I don’t be at Hamvention this year. Lou, W0FK ----- St. Louis, MO "The difference between stupidity and genius is that genius has its limits." Albert Einstein -- Sent from: http://elecraft.365791.n2.nabble.com/ ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
St. Louis, MO
"The difference between stupidity and genius is that genius has its limits." Albert Einstein |
|
|
In reply to this post by Frank Krozel
<broken_record>
Dare I, at this early stage, ask about built-in eyes-free accessibility? </broken_record> Buddy Brannan, KB5ELV - Erie, PA Email: [hidden email] Mobile: (814) 431-0962 > On May 16, 2019, at 1:56 PM, Frank Krozel <[hidden email]> wrote: > > It IS on the Elecraft site > https://elecraft.com/products/k4-transceiver?fbclid=IwAR1ZvSRipjGHXFT4CeD5iYhFDj89Oa7ZYJ-1rV5u83e9UYHFdg9TDsceMbE > Frank KG9H > > >> On May 16, 2019, at 12:54 PM, David Box <[hidden email]> wrote: >> >> I googled Lutz electronics and did a translate of their web site. If this is a hoax there has been a lot of work put into it. Guess we need to standby for Dayton. >> >> <https://translate.google.com/translate?hl=en&sl=auto&tl=en&u=https%3A%2F%2Fwww.lutz-electronics.ch%2Fstationaer%2Famateurfunkgeraete%2Felecraft-k4%2F> >> >> de Dave K5MWR >> >> On 5/16/2019 11:51 AM, rboutell wrote: >>> Just going to leave this here: >>> https://www.lutz-electronics.ch/pdf/K4_Brochure-print_Lutz.pdf >>> Russ, W9RB >>> >>> >>> >>> ----- >>> 73, Russ - W9RB >>> -- >>> Sent from: http://elecraft.365791.n2.nabble.com/ >>> ______________________________________________________________ >>> Elecraft mailing list >>> Home: http://mailman.qth.net/mailman/listinfo/elecraft >>> Help: http://mailman.qth.net/mmfaq.htm >>> Post: mailto:[hidden email] >>> >>> This list hosted by: http://www.qsl.net >>> Please help support this email list: http://www.qsl.net/donate.html >>> >>> >> ______________________________________________________________ >> Elecraft mailing list >> Home: http://mailman.qth.net/mailman/listinfo/elecraft >> Help: http://mailman.qth.net/mmfaq.htm >> Post: mailto:[hidden email] >> >> This list hosted by: http://www.qsl.net >> Please help support this email list: http://www.qsl.net/donate.html > > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[hidden email] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html |
«
Return to Elecraft
|
1 view|%1 views
| Free forum by Nabble | Edit this page |