Elecraft KPA1500

[hhoyt]

>>A 1.5 KW, RTTY capable 160 - 6 Meter Amp,
>>WITH an Antenna Tuner AND priced
>>around $5K would sell like hotcakes.

I'm like a lot of other hams who are fortunate/hard working enough to be able to afford the Elecraft K-line, and know two who have already augmented their full K-lines with Acom2000s.  They both stated if Elecraft had an amp that did legal limit they would have bought Elecraft instead.  I suspect there are several thousand K-line owners who are the same, including me, I have recently been looking at the Acom myself for the same reason but don't happen to have $7k in my wallet at the moment.  I love the inherent integration Elecraft designs into it's K-line and would buy a KPA1500 in a minute in the $5k range.

One request: I own a KPA500 and it's fan/jet engine exhaust is far too loud for quiet shack use when contesting.  The decision to use a high head-pressure tunnel sink design was made early in the design process to keep the case size down, and it performs very well with the exception of the inescapable noise.  I know others have installed quieter fans, but an analysis of air-flow will show them incapable of the same degree of cooling.  I have been designing cooling solutions for industrial systems for years and if you study fan manufacturer's CFM/pressure curves, you find there is a pretty invariant relationship between a fan's ability to maintain CFM into back pressure and it's noise with today's fan designs, regardless of brand or blade shape.

If and when Elecraft designs a KPA1500, I suggest multiple slower-spinning, quiet 120mm fans be considered to keep noise to a minimum, as opposed to multiple small higher-RPM fans which can make more noise.  Alternatively a heavily baffled air flow path such as the Acom uses (but which takes space) can offer adequate noise reduction.  This is an initial design criterion which dictates heatsink design and case layout...but Elecraft's engineers know all that stuff.

Just my $0.02,

Howie - WA4PSC

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

[Raymond Sills]

All this discussion about a KPA1500 is interesting.  If I had a  
permanent shack... and I had a K3, I think I'd be quite happy with a  
KPA500.. even with a "noisy" fan.  Going that extra distance (expense)  
for a few more dB.. does not seem to be very cost effective.  Of  
course, there are those who will not spare the expense, and that's fine.

But, really, I'm quite happy being a QRP guy, and running my KX3 from  
battery power.  I'd rather spend disposable funds on another KX3...  
(nice to have a spare on hand).  :)  So, keep making them, Eric & Wayne!

OK... I might -consider- a KXPA100, but only because with today's  
battery technology, it would be possible to power them that way.  But,  
it would likely be down a bit on my "wish list".

73 de Ray
K2ULR
KX3 #211

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]