Elecraft Memory Editor

[Richard E Neese]

is there a way to add in a field for power level setting ? this way when
you go to a data mem it sets the power at say 4.8 and maybe 8w on a diff
freq and 10 on another ?

this seems to be a missing option for ease of field use. Having to
adjust the power manfully all the time seems a bit time consuming

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Dick Dievendorff]

Power is a per band setting, not per memory. There is no power field in the K3 frequency memory.

Dick, K6KR


On Jun 29, 2013, at 1:29 PM, Richard Neese <[hidden email]> wrote:

> is there a way to add in a field for power level setting ? this way when you go to a data mem it sets the power at say 4.8 and maybe 8w on a diff freq and 10 on another ?
>
> this seems to be a missing option for ease of field use. Having to adjust the power manfully all the time seems a bit time consuming
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html