Elecraft P3 Display

[kd1na]

One of the things that can be confusing is a very busy display. I think all that should be highlighted on the panadaptor display is the DSB bandwidth. That is what bandwidth you are receiving, not the crystal filter bandwidth.

73
Dave KD1NA

Message from Wayne:

However, the P3 will be aware of the K3's filter bandwidth and offset,  
so we can show a bracketed or otherwise highlighted area on the P3  
display that reflects the filter settings. We could show both the DSP  
and crystal bandwidth using different colors.
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Jon Kåre Hellan]

David Robertson wrote:
> One of the things that can be confusing is a very busy display. I think all that should be
 > highlighted on the panadaptor display is the DSB bandwidth. That is what bandwidth you are
> receiving, not the crystal filter bandwidth.

This is indeed very useful, but you don't need a panadapter at all. I often use a digital modes
program when operating CW, just to see the signals on the waterfall.

73
Jon LA4RT
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html