Elecraft W2 VHF/UHF Coupler use with 12VDC preamps

[SVangen]

It appears from the schematic that the Elecraft 144-450 MHz Directional
Coupler for the W2 SWR/Power Meter can safely pass DC voltage without any
direct interface nor danger of damage with the sensor electronics.  My
question, has anyone confirmed that the VHF/UHF couplers are safe to use
with 12VDC in-line coax powered preamps (i.e. Icom AG-25/35 preamps with an
Icom IC-9100 Sat Transceiver).
Thank you,
Scott Vangen WB0QMZ



--
Sent from: http://elecraft.365791.n2.nabble.com/
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html