Elecraft k-2 / 100 for sale

classic Classic list List threaded Threaded
2 messages Options
Reply | Threaded
Open this post in threaded view
|

Elecraft k-2 / 100 for sale

ve3vtg
Selling my k2/100 in near mint condition.

 

https://forums.qrz.com/index.php?threads/elecraft-k2-100-w.538002/

 

 

Thanks es 73 de ve3vtg

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]
Reply | Threaded
Open this post in threaded view
|

KXPA100 no more output on 20m

Christian Gondard
Hello

I have just discovered that I have a trouble with my KXPA100 on 20m, and
only on this band.

The set up is a KX3 connected to the KXPA100 using the internal ATU of
the KXPA100 ; the fault occurs on the usual antenna (a 2x20 doublet +
450 ohms ladder line) or with a 50 ohms dummy load. The KXPA100 settings
are : ANT1, Mode = Man

My first investigations are :

 1. I can get 10 watts or under by selecting the power from the KX3 (in
    this range the KXPA100 is by passed)
 2. when I select the next power setting (11 watts), the output power
    goes to 0 on the KXPA100 ; on a separate RX (my old K2) I can hear a
    signal coming from the KX3, but weaker than when the kx3 is alone
    under 10 watts ; the drain current for the KXPA100 on 20m is roughly
    the same as for other bands : 7 amps for 30w, 11 amps for 60w, but
    no RF output on 20m
 3. when I bypassed the KXPA100, I can get up to 15 watts from the KX3
    alone, so the KX3 seems OK
 4. when I try to use the KXPA100 above 10 watts, the green TX is ON as
    for other bands, and other LED are in same status as for other bands


Using the KXPA100 utility, I can see that :

 1. when I send an ATU TUNE, the KXPA100 ATU finds a 1.3 SWR on the KX3
    panel and 1.1 on the KXPA100 utility (C= 0pf and 1480 nH) and the
    25w LED lights as for other bands ; the kx3 power at this moment is 5w
 2. when I try to TX, the kx3 sent power is coherent with the requested
    KXPA100 power (from 1 to 4 watts), but the SWR goes high (more 5 and
    fluctuating ) forward and reflected powers are 0, and dissipated
    power is high : 130 w !!

Before calling the elecraft support , does somebody has a good idea ?

Tnx in advance

Chris / F6FTB





---
L'absence de virus dans ce courrier électronique a été vérifiée par le logiciel antivirus Avast.
https://www.avast.com/antivirus
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]