Ron,
I bought a soldering station from Circuit Specialists in AZ and, as the
order was more than $50, I got a FREE Digital Multi-Meter - it does a
good job and I get the same readings I do from my B&K 2707A (cost me
about $80 a year ago from Mouser but it reads capacitance, and
transistor gain which the FREE DMM doesn't). FREE is good and the
performance is A-OK.
I also picked up the needle nose pliers and flush cut pliers (sized for
circuit board work) at Home Depot for about $12 and they're great...got
all of this info from reading the building tips link on the Elecraft
site.
Am well along with K2-100, S/N # 5266....a fantastic kit and well done
in all respects.
Good luck, hope you'll join the fray!
73,
"H" Cary, K4TM
_______________________________________________
Elecraft mailing list
Post to:
[hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help:
http://mailman.qth.net/subscribers.htmElecraft web page:
http://www.elecraft.com
Locked
