Elecraft] two 2m-Transverters for diversity reception on 2m

classic Classic list List threaded Threaded
1 message Options
Reply | Threaded
Open this post in threaded view
|

Elecraft] two 2m-Transverters for diversity reception on 2m

Samir Popaja
One can use JAVORNIK, transverter with 2 RX...

http://lea.hamradio.si/~s53ww/xvrt/xvrt.htm

http://lea.hamradio.si/~s53rm/JAVORNIK%20144.htm

73' 7S7V


Message: 3
Date: Mon, 13 Sep 2010 09:09:01 -0800
From: "Edward R. Cole" <[hidden email]>
Subject: [Elecraft]  two 2m-Transverters for diversity reception on 2m
To: [hidden email]
Message-ID: <[hidden email]>
Content-Type: text/plain; charset="us-ascii"; format=flowed

John is correct.  Diversity receivers require a common LO.  This is
provided in the K3 with the aux receiver, but adding VHF transverters
to both receivers will not add properly if they are running separate
LO's.

I am in the process of setting up a 2m dual-polarity receiver using
two transverters but run with one LO driving both units.  I
discovered that DEMI is developing a dual-Rx transverter (two Rx
antenna ports and IF outputs) that implements this in a single unit -
I'm on the short-list to get one when available).

Just connecting two separate 2m transverters will not ensure proper
phase relationship between the two IF outputs so one could end up
with a situation where the two signals null each other.  This is
analogous to combining two transmit amplifiers.  If the outputs are
out of phase energy from one will to into the other with disastrous
effect.

73, Ed - KL7UW

------------------------------
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html