ErrTXF using FM on 10m

[tomb18]

Hi,

I decided to try out some FM on 10m and when I start to transmit, I get a brief signal then the ERR TXF. My filters are set up for FL1 receive and transmit.  I hear fine.  Any ideas?
Oh, and how do I respond to the list instead of the emails I receive?
Thanks, Tom
VA2FSQ

[Greg - AB7R]

Do you have the 13 kHz FM filter installed in slot one?  It has to be
set as the TX filter for FM.

73
Greg


On 3/19/13, tomb18 <[hidden email]> wrote:

> Hi,
>
> I decided to try out some FM on 10m and when I start to transmit, I get a
> brief signal then the ERR TXF. My filters are set up for FL1 receive and
> transmit.  I hear fine.  Any ideas?
> Oh, and how do I respond to the list instead of the emails I receive?
> Thanks, Tom
> VA2FSQ
>
>
>
> --
> View this message in context:
> http://elecraft.365791.n2.nabble.com/ErrTXF-using-FM-on-10m-tp7571521.html
> Sent from the Elecraft mailing list archive at Nabble.com.
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[tomb18]

Yes, the filter is installed in FL1.

[Dick Dievendorff]

If you use the K3 Utility's Filter Configuration dialog, have you identified
the filter in FL1 as having 13 kHz bandwidth, enabled for FM Tx and Rx?

73 de Dick, K6KR


-----Original Message-----
From: [hidden email]
[mailto:[hidden email]] On Behalf Of tomb18
Sent: Tuesday, March 19, 2013 3:46 PM
To: [hidden email]
Subject: Re: [Elecraft] ErrTXF using FM on 10m

Yes, the filter is installed in FL1.



--
View this message in context:
http://elecraft.365791.n2.nabble.com/ErrTXF-using-FM-on-10m-tp7571521p757152
3.html
Sent from the Elecraft mailing list archive at Nabble.com.
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[tomb18]

Oops.  I had the filter bandwidth at 12 not 13.
That did the trick!  Thanks!
One other thing, why can't you use the dsp to get down to 6Khz for AM?