Expert 1.3 to KX3
Locked
 
|
Has anyone made up a cable to link the KX3 to the Expert 1.3.
I am about to get Dan to make up one for me and was interested of anyone's experience of running the expert with the KX3. Also to see how the cable works from which pins to which? MØTDZ Trevor Clapp M6LDZ 2E0LDZ [hidden email] <mailto:[hidden email]> RADIO BLOG <http://chopcat.co.uk/page1/blog/index.html> ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [hidden email] |
|
|
Hello,
you just need the (E980232) ACC2 IO Cable Module and a RCA-RCA (Male-Male) cable to send the PTT to the Expert. The (E980232) ACC2 IO Cable Module is part of the Cable kit pack for the KX3 that i always suggest to buy. ALC is useless, the maximum power out of the KX3 is not a problem for the Expert. With 5 watt you always get more the 1 Kw out. Is up to you if you need CAT assistance or not, but the Expert have an internal frequency counter that can read the radio frequency and set the correct BAND-ANTENNA for you (based on the expert settings you did before). Just give a short shot on the CW Key and the Expert will change the band, if for a reason or another, was not automaticcally changed. Hope to help... 73's de Graziano IW2NOY Il 05/07/2018 09:49, 2EØLDZ ha scritto: > Has anyone made up a cable to link the KX3 to the Expert 1.3. > > I am about to get Dan to make up one for me and was interested of anyone's experience of running the expert with the KX3. Also to see how the cable works from which pins to which? > > MØTDZ > > Trevor Clapp > M6LDZ > 2E0LDZ > [hidden email] <mailto:[hidden email]> > > RADIO BLOG <http://chopcat.co.uk/page1/blog/index.html> > > > > > > > > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[hidden email] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to [hidden email] ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [hidden email] |
|
|
Many thanks Rocco.
That will be fine for me to test it out and I have the cable set somewhere I am sure. cheers Trevor Trevor Clapp M6LDZ 2E0LDZ [hidden email] <mailto:[hidden email]> RADIO BLOG <http://chopcat.co.uk/page1/blog/index.html> 07900 49 77 11 On 5 Jul 2018, at 10:58, ROCCON GRAZIANO GIULIANO <[hidden email]> wrote: Hello, you just need the (E980232) ACC2 IO Cable Module and a RCA-RCA (Male-Male) cable to send the PTT to the Expert. The (E980232) ACC2 IO Cable Module is part of the Cable kit pack for the KX3 that i always suggest to buy. ALC is useless, the maximum power out of the KX3 is not a problem for the Expert. With 5 watt you always get more the 1 Kw out. Is up to you if you need CAT assistance or not, but the Expert have an internal frequency counter that can read the radio frequency and set the correct BAND-ANTENNA for you (based on the expert settings you did before). Just give a short shot on the CW Key and the Expert will change the band, if for a reason or another, was not automaticcally changed. Hope to help... 73's de Graziano IW2NOY Il 05/07/2018 09:49, 2EØLDZ ha scritto: > Has anyone made up a cable to link the KX3 to the Expert 1.3. > > I am about to get Dan to make up one for me and was interested of anyone's experience of running the expert with the KX3. Also to see how the cable works from which pins to which? > > MØTDZ > > Trevor Clapp > M6LDZ > 2E0LDZ > [hidden email] <mailto:[hidden email]> > > RADIO BLOG <http://chopcat.co.uk/page1/blog/index.html> > > > > > > > > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[hidden email] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to [hidden email] ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [hidden email] |
|
|
I used KX3 + 1.3k with Dan's cables during expedition to CE0Y in CQ. Read
about experiences in CQ Magazine (Oct 2017?). -- Sent from: http://elecraft.365791.n2.nabble.com/ ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [hidden email] |
«
Return to Elecraft
|
1 view|%1 views
| Free forum by Nabble | Edit this page |