The fix was turning up the mic input for Line In (shows temporary while turning the mic gain) and of course using the Line In port. Thanks all
Regards,
Mark, K1RX
> On Sep 22, 2018, at 7:58 AM, Don Wilhelm <
[hidden email]> wrote:
>
> MIC + LINE. Plug the PC soundcard into the LINE IN jack, not the reaar mic jack.
>
> 73,
> Don W3FPR
>
>> On 9/21/2018 11:46 PM, Mpridesti via Elecraft wrote:
>> How do I configure the K3 to accept audio from my PC sound card and use the front panel mic at the same time?
______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.htmlMessage delivered to
[hidden email]