I assume you also have the KAT3. The sub-rx can either be hooked up to
the KAT3 or the AUX RF(bnc) connector, but not both. When done, there
is a TMP cable that is connected to the KAT3 or AUX RF and one of the
two is not connected to the sub-rx. You might have missed the step
where you attached that "extra" cable to its chassis connector. See
Fig. 4 on page 43 in the owners manual. Unless you plan to have a
receive-only antenna, the dotted line is normally not attached to your
sub-rx.
Eric
WB7SDE
On Mon, Jun 16, 2014, at 11:11 AM, N1IX wrote:
--
Eric Ross
______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.htmlMessage delivered to
[hidden email]