Extra parts

[Arthur Nienhouse]

I was able to just take off the top cover and hold down for the power
transformer.
Then install the extra parts use a deep 1/2 " socket to tighten up the nut
holding the long socket with threads  coming through top of the socket
then tighten the nut under the bottom.
It all tightened up well had to hold the socket with a pliers for finish
torque
on the nut. All that was needed  is to take off the top cover to finish the
installation.

Regards
Art
ka9zap
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html