FLDIGI rig control, mic disable

[Jack Berry]

Is there a way for FLDIGI to mute the front panel mic input with transmitting digital modes?
I use FLDIGI 3.21.77 with SignaLink USB, mostly for MT63 MARS work.
The SLUSB is connected to the Line In on the back panel. It all works well except.....

While transmitting MT63 the mic remains open, normally no problem. However if a dog barks or a phone rings then all bets are off on the quality of the transmission. This is especially true if conditions are marginal.

Thanks for any help!




God Bless & 73!
Jack - WE5ST
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

[Don Wilhelm-4]

Jack,

Go into the main menu and turn off MIC+LINE and both mic inputs will be
muted.
I assume you have MIC SEL set to LINE, but check that too or your data
mode transmission will not work.

73,
Don W3FPR

On 3/27/2014 2:25 PM, Jack Berry wrote:
> Is there a way for FLDIGI to mute the front panel mic input with transmitting digital modes?
> I use FLDIGI 3.21.77 with SignaLink USB, mostly for MT63 MARS work.
> The SLUSB is connected to the Line In on the back panel. It all works well except.....
>
> While transmitting MT63 the mic remains open, normally no problem. However if a dog barks or a phone rings then all bets are off on the quality of the transmission. This is especially true if conditions are marginal.
>
>

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]