>"Has anyone else experienced this and if so have you found any solutions?"
Easily solved with any low-pass filter on the K3's ANT1 port (EF Johnson,
Nye, Drake, Bencher, countless others). Then use ANT2 for 6m. The
multipole LP filters typically have a sharp cut-off above 35 MHz and
response is down some 70-80 dB at FM broadcast frequencies. Bencher specs
their YA-1 filter -80 dB at 52 MHz with 0.2 dB insertion loss.
I went through this very issue with several Ten Tec transceivers. I used a
Nye filter that way for 10+ years and it completely cured the problem.
Paul, W9AC
______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.htmlMessage delivered to
[hidden email]
Locked
