FS: Balun Designs 1:1 FCP Isolation Transformer

[Elecraft mailing list]

Continuing my downsizing in preparation for a move. I’m selling a Balun Designs 1:1 FCP (Folded CounterPoise) Isolation Transformer, model 1142s. This is the 2kW model designed for 160 meter operation.

I used it for several years connected on one end to my K3/KPA500/KAT500 for accomplishing Worked All States on 160 meters from a small city lot. The antenna was an FCP designed by W0UCE (sk) and K2AV. It did it’s job but I’ve taken down the antenna and most likely will not have a 160 meter antenna at my new QTH - lack of trees. Thus, I’ve no need for this unit. A new one from Balun Designs will run you $92 plus shipping and maybe tax. I’ll let this one go for $50, shipped FREE via USPS Priority Mail - USA only.

It is in good condition with only two issues: two of the four plastic mounting tabs have broken off, and there is some liquid electrical tape residue at the junction of the box and the SO-239 antenna port. Photos available upon request. Contact me off-list if you are interested.

As a side note, if you are thinking you’d like to get on 160 meters but don’t have room for miles of radials or a 250+ foot span for a dipole, consider what I used: a very modest Inverted L and one of these FCP systems under it. Check out the K2AV.com <http://k2av.com/> web site for information on this antenna. Guy has instructions for winding and building your own FCP. I did that when I put up my first Inverted L, for 80 meters. It was a learning experience. However, when I decided to put up a 160 meter Inverted L, I opted for a commercial version - the one I’m selling. :-)


Jim Bennett
Folsom, CA

K7TXA (ex W6JHB as of 1/22/2021)

Being retired doesn't mean I'm not part of the work force - just that I'm not forced to work!



______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

[Elecraft mailing list]

The Balun is sold.


Jim Bennett
Folsom, CA

K7TXA (ex W6JHB as of 1/22/2021)

Being retired doesn't mean I'm not part of the work force - just that I'm not forced to work!

> On Jan 30, 2021, at 11:12 AM, James Bennett via Elecraft <[hidden email]> wrote:
>
> Continuing my downsizing in preparation for a move. I’m selling a Balun Designs 1:1 FCP (Folded CounterPoise) Isolation Transformer, model 1142s. This is the 2kW model designed for 160 meter operation.
>
> I used it for several years connected on one end to my K3/KPA500/KAT500 for accomplishing Worked All States on 160 meters from a small city lot. The antenna was an FCP designed by W0UCE (sk) and K2AV. It did it’s job but I’ve taken down the antenna and most likely will not have a 160 meter antenna at my new QTH - lack of trees. Thus, I’ve no need for this unit. A new one from Balun Designs will run you $92 plus shipping and maybe tax. I’ll let this one go for $50, shipped FREE via USPS Priority Mail - USA only.
>
> It is in good condition with only two issues: two of the four plastic mounting tabs have broken off, and there is some liquid electrical tape residue at the junction of the box and the SO-239 antenna port. Photos available upon request. Contact me off-list if you are interested.
>
> As a side note, if you are thinking you’d like to get on 160 meters but don’t have room for miles of radials or a 250+ foot span for a dipole, consider what I used: a very modest Inverted L and one of these FCP systems under it. Check out the K2AV.com <http://k2av.com/> web site for information on this antenna. Guy has instructions for winding and building your own FCP. I did that when I put up my first Inverted L, for 80 meters. It was a learning experience. However, when I decided to put up a 160 meter Inverted L, I opted for a commercial version - the one I’m selling. :-)
>
>
> Jim Bennett
> Folsom, CA
>
> K7TXA (ex W6JHB as of 1/22/2021)
>
> Being retired doesn't mean I'm not part of the work force - just that I'm not forced to work!
>
>
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to [hidden email]

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]