FS: Factory built KX3 with Accessories

[KA7KDX]

I need to fund the downpayment on a new (to me) vehicle so the KX3 has to go.

Factory Built Serial Number 1366
Excellent Condition Current Firmware
Non-Smoker owned, no scratches dents or otherwise
Gem products side KX endplates & dust cover (original end pieces included too)
Think Tank padded lens case to keep it safe

All original boxes and manual

All currently available options (except 2M module)
KX3-PCKT Accessory Cable Set
USB Cable
KXAT3 ATU for the KX3
KXBC3 Internal NiMH Charger and RTC
Eneloop NiMH AA batteries
KXFL3 Dual-Passband Roofing Filter
KXPD3 Paddle with KXPD3 Upgrade Kit (not installed)
MH3 Hand Mic
XG3 Signal Generator
pignology piglet and serial cable allows wireless control from iPad or Android
Pro Audio Engineering Heat sink (no paint removed)

This has been thermal calibrated using the XG3

I'd like to get $1400 + shipping, double boxed and insured. Paypal only.

I also have a Icom IC-7000 mobile package with Tarheel II and Tune Controller if anyone is interested.

Brian KA7KDX





______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

[KA7KDX]

Both the KX3 and the IC-7000 have been sold. Thanks for playing :)

B


On 6/30/15, 6:54 AM, "Brian Sheets" <[hidden email]> wrote:

>I need to fund the downpayment on a new (to me) vehicle so the KX3 has to
>go.
>
>Factory Built Serial Number 1366
>Excellent Condition Current Firmware
>Non-Smoker owned, no scratches dents or otherwise
>Gem products side KX endplates & dust cover (original end pieces included
>too)
>Think Tank padded lens case to keep it safe
>
>All original boxes and manual
>
>All currently available options (except 2M module)
>KX3-PCKT Accessory Cable Set
>USB Cable
>KXAT3 ATU for the KX3
>KXBC3 Internal NiMH Charger and RTC
>Eneloop NiMH AA batteries
>KXFL3 Dual-Passband Roofing Filter
>KXPD3 Paddle with KXPD3 Upgrade Kit (not installed)
>MH3 Hand Mic
>XG3 Signal Generator
>pignology piglet and serial cable allows wireless control from iPad or
>Android
>Pro Audio Engineering Heat sink (no paint removed)
>
>This has been thermal calibrated using the XG3
>
>I'd like to get $1400 + shipping, double boxed and insured. Paypal only.
>
>I also have a Icom IC-7000 mobile package with Tarheel II and Tune
>Controller if anyone is interested.
>
>Brian KA7KDX
>
>
>
>
>
>______________________________________________________________
>Elecraft mailing list
>Home: http://mailman.qth.net/mailman/listinfo/elecraft
>Help: http://mailman.qth.net/mmfaq.htm
>Post: mailto:[hidden email]
>
>This list hosted by: http://www.qsl.net
>Please help support this email list: http://www.qsl.net/donate.html
>Message delivered to [hidden email]

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]