FS: K144XV 2m module + Reference Lock module

[Jim Spears]

I am selling one of my two K144XV 2m module plus the Reference Lock module
which is installed inside the 2m module.  This module was removed from a
K3S.  All parts which will be needed to install in either a K3 or a K3S will
be included.  The only missing part that I am aware of is the one pin
connector which is soldered to a K3 main board.  This connector is NOT
needed for a K3S.  The Reference Lock module locks the 2m module to the
either a KSYN3 or KSYN3A synthesizer.  The synthesizer module itself can be
locked to an external 10 MHz reference but this is not necessary for the
K144XV Reference Lock module to do its job.  Asking $350 for both as
described above.  

Jim Spears

N1NK

[hidden email]

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]