I have for sale a K2 (s/n 3935) plus a KPA-100 / KAT-100 (separate EC2
enclosure). Professionally
built by long time experienced kit builder and home-brew specialist. No
problems, meets or performs
better than all published K2 / KPA100 specifications. No dents, dings,
scratches, etc. Smooth
operation, no control "scratchies" or intermittents. Filters precision
set and matched with Spectrogram
for filter slope, bandwidth, center frequency, etc.
Asking $2000.00 (or best offer) for complete package, shipped via Fedex
to USA
locations only. Contact me off list for additional details, including
payment and shipping options.
Base K2 list:
K2 transceiver, with all upgrades. Has: KNB2 noise blanker, KSB2 SSB
module, KAT2 antenna coupler
KDSP2 DSP filter and clock, FDIMP finger dimple, K160RX 160-meter
option / RX antenna port
KIO2 I/O interface module, KBT2 Internal battery with new battery,
ETS15 1.5" tilt-bail. Does not have
K60XV 60-meter option (I had to leave something for the new owner to do!)
The base K2 also includes the following upgrades and options:
K2KEYMDKT keying mod, E850138 Temp compensated PLL Mod, BFOMDKIT BFO
mod kit
Firmware 2.04, K2KSB2XTLS set of 14 matched crystals for the K2 and
KSB2 (installed)
K2 Manual (new, unmarked), SSBCAPKT SSB 2.4 kHz bandwidth kit
(installed),
AMPKEYKIT keying kit for external amplifier, FWKDSP2 KDS2 firmware
upgrade
KPA-100 list:
KPA100 100 watt PA unit, KAT100-2 100 watt auto-tuner, EC2 Elecraft
enclosure
ETS15 1.5" tilt-bail, KPA100 manual (new, unmarked),
KPA100MODKT High-SWR mod kit for KPA100
Does NOT include a high-current 12V .20 Amp DC supply for the KPA-100.
You will have to
supply this yourself.
Also included:
Samsonite 25-series zipper case (holds base K2, mic, paddle, headset,
antenna materials, etc. )
13.5V 2.5A small switcher type DC supply (runs K2 from 120V AC and/or
charges KBT2)
Palm retractable mini-paddle - a beautifully built and smooth operating
paddle for portable CW operation
Nifty-Ham K2 Mini-manual (operating guide for K2 / KPA100 and all options)
Kenwood hand-mic (fits K2 for SSB operation)
- Jim, KL7CC
_______________________________________________
Elecraft mailing list
Post to:
[hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help:
http://mailman.qth.net/subscribers.htmElecraft web page:
http://www.elecraft.com
Locked
