FS K3, P3, W2,accessories

[Randy Diddel-2]

For sale.  My K3/100 (factory built with serial 707x), W2 wattmeter,
Signalink USB (with K3 jumper and cable), and P3 panadaptor.  K3 is LOADED.
 K3 has 100W PA, ATU, 2nd RX (SUB RX), DVR,  two 2.7 (matched) file pole
filters & two 2.1K  8 pole filters (for each RX), KXV3A (IF out/Transverter
interface), USB CAT/programming cable. P3 has PSVGA out for ext display
there are some light scratches on the side of the P3 (from rubbing against
the handle the K3). W2 wattmeter is has 1.8-54mhz 2KW module. Some modules
in the K3 were added by me after the initial purchase of the K3. All cables
needed are included along with all manuals plus Fredy Cady Manual! Email me
for full configuration and more pics. K3 was back at Elecraft in Feb for
realignment and general once over-clean bill of health. All this is over
5500 new. Asking 4300.00 price includes shipping and PayPal fees- Paypal
only. Price is firm pics here:
https://www.flickr.com/photos/randydid/sets/72157645199807619/

The XYL is going into law school and I need to reduce/eliminate my student
loan debt

Please reply off list.

73 de K5RHD

/randy
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

[Randy Diddel-2]

Will ship to U.S. only and AK/HI may be a little extra. Sorry.

K5RHD

/randy


On Fri, Jul 18, 2014 at 10:01 AM, Randy Diddel <[hidden email]> wrote:

> For sale.  My K3/100 (factory built with serial 707x), W2 wattmeter,
> Signalink USB (with K3 jumper and cable), and P3 panadaptor.  K3 is LOADED.
>  K3 has 100W PA, ATU, 2nd RX (SUB RX), DVR,  two 2.7 (matched) file pole
> filters & two 2.1K  8 pole filters (for each RX), KXV3A (IF out/Transverter
> interface), USB CAT/programming cable. P3 has PSVGA out for ext display
> there are some light scratches on the side of the P3 (from rubbing against
> the handle the K3). W2 wattmeter is has 1.8-54mhz 2KW module. Some modules
> in the K3 were added by me after the initial purchase of the K3. All cables
> needed are included along with all manuals plus Fred Cady Manual! Email me
> for full configuration and more pics. K3 was back at Elecraft in Feb for
> realignment and general once over-clean bill of health. All this is over
> 5500 new. Asking 4300.00 price includes shipping and PayPal fees- Paypal
> only. Price is firm pics here:
> https://www.flickr.com/photos/randydid/sets/72157645199807619/
>
> The XYL is going into law school and I need to reduce/eliminate my student
> loan debt
>
> Please reply off list.
>
> 73 de K5RHD
>
> /randy
>
>
>

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]