FS: K3 Panadapter plus accessories - reduced!

[Don Rasmussen]

My cost $395 - no offers at $350, will take first $275, and ship in original  factory boxes - all items as new. 73, Don...

Includes full hardware setup.

1. E-MU0202 USB external soundcard
2. Factory assembled LP-Pan
3. Connecting USB, audio, IF, and power cables.

You download the free PowerSDR and Ham Radio Deluxe. This sound card is the LP-Pan suggested full feature card with better than 160 khz display,
allows point and click on the panadapter display.

will ship CONUS, please contact me directly only - no replies to the list. wb8yqj at yahoo dot com - Don
_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft   

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com

[paul hendershott]

Can the K3 be re-set back to the original Main Menu/Config settings that the K3 arrived with? I have the latest firmware installed. Tx!

_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft   

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com

[Dave, G4AON]

Paul, to return the K3 to an “as received” condition power up while
holding the SHIFT/LO knob depressed. Obviously it doesn't return to
earlier firmware. In the past 12 months of ownership, and endless
firmware upgrades/downgrades, I've never needed to clear all the settings.

73 Dave, G4AON
K3/100 #80
_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft   

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com

[Bill W4ZV]

paul hendershott wrote

Can the K3 be re-set back to the original Main Menu/Config settings that the K3 arrived with? I have the latest firmware installed.

If you just want to return some CONFIG settings to their defaults, tap METER while in the specific CONFIG Menu and you will see the default setting in the display.  For example, while in CONFIG:AGC THR, tap METER and you will see <5> AGC THRESHOLD.  The number in the < > is the default setting.

To do a full reset, see Parameter Initialization on page 61 of the current manual, and read it *very carefully* because you will need to redo calibration and firmware setup (unless you SAVE everything beforehand and then RECALL using the K3 Utility Configuration Menu, which may defeat your intention to reset everything).

73,  Bill