FSQCALL (K3)

[Elecraft mailing list]

Joe- replies embedded at dashes in italics

What softwareare you using for FSQCALL?  I see atleast three programs

that supportFSQ mode.

-- usingFSQCALL v0.36 by ZL2APF What are thePTT settings in your software? - settings inPTT/Cat settings  are com14 --00,kenwood(oldermodels) -- Use PTTIs your software trying to do hand shake on the CAT Port and asserting RTS on the CAT Port as soonas the software starts?--- Not sure how to check that? What PTToptions are enabled in microHAM Router?

-- com11 forRTS (same port as for CAT) Is"Sound card PTT" checked in microHAM Router -- on PTT tab, Sound card PTT is checked
and does your software open thesound card for transmit as soon as it starts?-- yes when FSQCALl opens, the icon for it opens in Windows Volume Mixer Do you have"Use Q-CW" or "Use P-FSK" checked in microHAM Router

-- No

and does yoursoftware generate audio on the *right* channel of the sound

card?

-- when Iopen the program and it puts K3 in tx, there is no audio showing in rightchannel
73Paulkc2nyu 
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

[Joe Subich, W4TV-4]

On 6/28/2016 5:20 PM, paul ecker via Elecraft wrote:
> Joe- replies embedded at dashes in italics

This list is *text only.*  HTML formatting is stripped by the
mailing list software.  Please properly quote and embed your
replies (as below) so those trying to answer/help you can not
only find your replies but understand to what you are replying.

>> Is"Sound card PTT" checked in microHAM Router
>
> -- on PTT tab, Sound card PTT is checked

*UNCHECK* "Sound card PTT"

>> does your software open the sound card for transmit as soon as it
>> starts?--
 >
> yes when FSQCALl opens, the icon for it opens in Windows Volume
> Mixer

That's gutter (lazy) programming.  The sound card output endpoint
should be opened when the program switches to transmit and closed
when the program returns to receive.

"Sound card PTT" relies on the internal flag (which is bought out
to a status pin on the CODEC chip) that indicates whether the end-
point is open or closed in order to generate PTT.  *DISABLE* Sound
card PTT by unchecking the box in microHAM Router (PTT Tab).

Please refer to the Users Manual for your microHAM interface.

73,

   ... Joe, W4TV


On 6/28/2016 5:20 PM, paul ecker via Elecraft wrote:

> Joe- replies embedded at dashes in italics
>
> What softwareare you using for FSQCALL?  I see atleast three
> programs
>
> that supportFSQ mode.
>
> -- usingFSQCALL v0.36 by ZL2APF What are thePTT settings in your
> software? - settings inPTT/Cat settings  are com14
> --00,kenwood(oldermodels) -- Use PTTIs your software trying to do
> hand shake on the CAT Port and asserting RTS on the CAT Port as
> soonas the software starts?--- Not sure how to check that? What
> PTToptions are enabled in microHAM Router?
>
> -- com11 forRTS (same port as for CAT) Is"Sound card PTT" checked in
> microHAM Router -- on PTT tab, Sound card PTT is checked and does
> your software open thesound card for transmit as soon as it starts?--
> yes when FSQCALl opens, the icon for it opens in Windows Volume Mixer
> Do you have"Use Q-CW" or "Use P-FSK" checked in microHAM Router
>
> -- No
>
> and does yoursoftware generate audio on the *right* channel of the
> sound
>
> card?
>
> -- when Iopen the program and it puts K3 in tx, there is no audio
> showing in rightchannel 73Paulkc2nyu
> ______________________________________________________________
> Elecraft mailing list Home:
> http://mailman.qth.net/mailman/listinfo/elecraft Help:
> http://mailman.qth.net/mmfaq.htm Post:
> mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net Please help support this
> email list: http://www.qsl.net/donate.html Message delivered to
> [hidden email]
>

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]