FSQCALL PTT (K3)
Locked
 
|
>> Joe- you said
"*UNCHECK* "Sound card PTT"""Sound card PTT" relies on the internal flag (which is bought out to a status pin on the CODEC chip) that indicates whether the end- point is open or closed in order to generate PTT. *DISABLE* Sound card PTT by unchecking the box in microHAM Router (PTT Tab).">> OK, Sound card PTT now unchecked>> So that solved the K3 immediately having the Tx light coming on at Program >>start and I am now Rx'ing just fine. But the only way I get the FSQCALL >>program to Tx is to use Vox on the K3. At Program start, the PTT/CAT settings >>window comes up every time. If I choose PTT or CAT, it says comport already in >>use. So I cancel the settings window and use Vox. It works but not sure it is >>ideal. >>73 Paul>>kc2nyu On 6/28/2016 5:20 PM, paul ecker via Elecraft wrote: > Joe- replies embedded at dashes in italics This list is *text only.* HTML formatting is stripped by the mailing list software. Please properly quote and embed your replies (as below) so those trying to answer/help you can not only find your replies but understand to what you are replying. >> Is"Sound card PTT" checked in microHAM Router > > -- on PTT tab, Sound card PTT is checked *UNCHECK* "Sound card PTT" >> does your software open the sound card for transmit as soon as it >> starts?-- > > yes when FSQCALl opens, the icon for it opens in Windows Volume > Mixer That's gutter (lazy) programming. The sound card output endpoint should be opened when the program switches to transmit and closed when the program returns to receive. "Sound card PTT" relies on the internal flag (which is bought out to a status pin on the CODEC chip) that indicates whether the end- point is open or closed in order to generate PTT. *DISABLE* Sound card PTT by unchecking the box in microHAM Router (PTT Tab). Please refer to the Users Manual for your microHAM interface. 73, ... Joe, W4TV ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [hidden email] |
|
|
On 6/29/2016 9:41 AM, paul ecker via Elecraft wrote: >>> Joe- you said > "*UNCHECK* "Sound card PTT"""Sound card PTT" relies on the internal flag (which is bought out > to a status pin on the CODEC chip) that indicates whether the end- > point is open or closed in order to generate PTT. *DISABLE* Sound > card PTT by unchecking the box in microHAM Router (PTT Tab).">> OK, Sound card PTT now unchecked>> So that solved the K3 immediately having the Tx light coming on at Program >>start and I am now Rx'ing just fine. But the only way I get the FSQCALL >>program to Tx is to use Vox on the K3. At Program start, the PTT/CAT settings >>window comes up every time. If I choose PTT or CAT, it says comport already in >>use. So I cancel the settings window and use Vox. It works but not sure it is >>ideal. >>73 Paul>>kc2nyu Please use <return> or <enter> between lines ... your use of HTML makes your postings nearly unreadable. >> OK, Sound card PTT now unchecked So that solved the K3 >> immediately having the Tx light coming on at Program start and I >> am now Rx'ing just fine. But the only way I get the FSQCALL >> program to Tx is to use Vox on the K3. Yes, that will work. >> At Program start, the PTT/CAT settings window comes up every time. That appears to be the nature of the software. For some reason it requires electing the PTT/CAT settings each time the program starts rather than settings in the ini file. >> If I choose PTT or CAT, it says comport already in use. So I cancel >> the settings window and use Vox. It works but not sure it is >> ideal. You will need to make sure no other program is currently using the CAT Port. Windows does not allow sharing of ports. Any program using a port must close (release) the port before another program can open (begin using it). These issues are not functions of the microHAM hardware or software - they are limitations of the application software and user understanding of Windows. 73, ... Joe, W4TV > On 6/28/2016 5:20 PM, paul ecker via Elecraft wrote: >> Joe- replies embedded at dashes in italics > > This list is *text only.* HTML formatting is stripped by the > mailing list software. Please properly quote and embed your > replies (as below) so those trying to answer/help you can not > only find your replies but understand to what you are replying. > >>> Is"Sound card PTT" checked in microHAM Router >> >> -- on PTT tab, Sound card PTT is checked > > *UNCHECK* "Sound card PTT" > >>> does your software open the sound card for transmit as soon as it >>> starts?-- >> >> yes when FSQCALl opens, the icon for it opens in Windows Volume >> Mixer > > That's gutter (lazy) programming. The sound card output endpoint > should be opened when the program switches to transmit and closed > when the program returns to receive. > > "Sound card PTT" relies on the internal flag (which is bought out > to a status pin on the CODEC chip) that indicates whether the end- > point is open or closed in order to generate PTT. *DISABLE* Sound > card PTT by unchecking the box in microHAM Router (PTT Tab). > > Please refer to the Users Manual for your microHAM interface. > > 73, > > ... Joe, W4TV > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[hidden email] > Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [hidden email] |
«
Return to Elecraft
|
1 view|%1 views
| Free forum by Nabble | Edit this page |