FT8 WITH K3 AND STATIONMASTER

[N9GB]

I run my k3 with a microham stationmaster (SM)and the USB port on the SM is
hooked to the computer while the CAT port is hooked to the RS 232 on the K3.
For FT-8 will my audio cables go from the computer to the K3 or will the SM
handle all that through the USB connection.

73¹s
Greg N9GB



______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

[Joe Subich, W4TV-4]

 > For FT-8 will my audio cables go from the computer to the K3

Yes.

> or will the SM handle all that through the USB connection.
No.  Station Master is a band decoder not a digital mode interface.

73,

    ... Joe, W4TV


On 2020-12-22 12:53 PM, Greg Best wrote:
> I run my k3 with a microham stationmaster (SM)and the USB port on the SM is
> hooked to the computer while the CAT port is hooked to the RS 232 on the K3.
> For FT-8 will my audio cables go from the computer to the K3 or will the SM
> handle all that through the USB connection.
>
> 73¹s
> Greg N9GB
>


______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]