FW: K2 - 160 mtrs

[Dan Barker]

The separate receiving antenna is selected via the menu RANT setting (per
band). Ant1/Ant2 is a function of the KATnnn module, and is independent of
the RANT setting. If RANT is on, the 160 antenna is receive and Ant1/Ant2
controls transmit. If RANT is off (on the band in use), then Ant1/Ant2
controls transmit and receive.

Clear as mud?

Dan / WG4S / K2 #2456

-----Original Message-----
From: [hidden email]
[mailto:[hidden email]]On Behalf Of rattray
Sent: Thursday, October 27, 2005 1:02 PM
To: Elecraft
Subject: [Elecraft] K2 - 160 mtrs



I'm finally getting around to using my K2 on 160 mtrs - is the idea of the
K2 that a separate receiving antenna for 160 mtrs can be attached to the bnc
connector on the back (K160RX option) while using the regular bnc connector
to connect to the 160 mtr antenna for transmitting? - one switches to the
receiving antenna from the front panel using ANT1/2? - 72 Bruce.

72/73 - Bruce ve5rc/ve5qrp - QRP-C#1, QRP-L#886, A1 Operator
            Enter QRP-Canada's "RUN with RAC" contest -            
            details - http://www.qrp-canada.com
 


_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com

_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft   

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com