FW: K2 Control Board

classic Classic list List threaded Threaded
3 messages Options
Reply | Threaded
Open this post in threaded view
|

FW: K2 Control Board

Dan Barker
No r22 on Control board. there is an rp2 that's 82K.

Viva Acrobat!

Download the PDF and use searches! It rocks!

Dan / WG4S / K2 #2456

-----Original Message-----
From: [hidden email]
[mailto:[hidden email]]On Behalf Of Glenn Haffly
Sent: Saturday, November 13, 2004 4:39 PM
To: 'Elecraft Reflector'
Subject: [Elecraft] K2 Control Board


K2 manual in parts listing shows an R22 , an 82K resistor.
I see no reference to this in the control board assembly or a place on the
board , or I missed it.

Glenn

_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com

_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft   
Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com

Reply | Threaded
Open this post in threaded view
|

Re: K2 Control Board

Don Wilhelm-3
Dan,

Don't throw that resistor away yet!!!  Yes, I agree that Acrobat Reader is
useful for stuff like that, BUT ...

Check the 3rd step on page 15 of your Rev F manual - you will see that R22
82k is placed into the holes marked 'D3'.

73,
Don W3FPR

----- Original Message -----

> No r22 on Control board. there is an rp2 that's 82K.
>
> Viva Acrobat!
>
> Download the PDF and use searches! It rocks!
>


_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft   
Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com

Reply | Threaded
Open this post in threaded view
|

Re: K2 Control Board

Francis Belliveau
On: Saturday, November 13, 2004 6:20 PM
"W3FPR - Don Wilhelm" <[hidden email]>
wrote:
> ...
> Don't throw that resistor away yet!!!  Yes, I agree that Acrobat Reader is
> useful for stuff like that, BUT ...
>
> Check the 3rd step on page 15 of your Rev F manual - you will see that R22
> 82k is placed into the holes marked 'D3'.
==================
All,

I want to point out the unmentioned lesson here is that the manual should be
searched for all references to such parts also.  The KAT2 has a resistor
that is only installed after initial calibration and in rereading it is also
difficult to find even when you know it is there.

Acrobat works wonders to find things that the human eye-brain combination
will often overlook.

73,
Fran


_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft   
Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com