FW: K3 Real Time Clock Display (got it)

[Terry Schieler]

Disregard.  I found that you tap DISP then rotate VFO B to select what is displayed.  Apparently it only rotates between two selections.

 

Terry, W0FM

 

From: Terry Schieler [mailto:[hidden email]]
Sent: Saturday, November 22, 2008 6:35 PM
To: '[hidden email]'
Subject: K3 Real Time Clock Display

 

I have had the clock displayed on my K3 since day one.  Today I noticed that tapping DISP only rotates between the VFO B Frequency readout and the current date.  Went into CONFIG and TIME and the clock was still set to the second.  I’m sure it’s something simple I bumped somewhere along the line. 

 

Any help would be appreciated.  Direct preferred as I get the reflector in digest mode and on a different computer than this one.

 

Thanks.

 

Terry, W0FM

K3/100 #474

_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft   

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com

[Ian Maude]

Terry Schieler wrote:
>
> Disregard.  I found that you tap DISP then rotate VFO B to select what
> is displayed.  Apparently it only rotates between two selections.
>
If you switch on CONFIG: TECH MD you will get much more info like PA
temperature etc Terry.

73 Ian
>
>  
>

--

Ian J Maude, G0VGS
SysOp GB7MBC DX Cluster
Member RSGB, GQRP
K2 #4044 |K3 #455
http://www.amateurradiotraining.org 

_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft   

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com