No Joy yet. Two list members made suggestions, i.e. “Are the filters “ON”, yes, and perhaps mis-plugged, but I don’t see how that could happen and still fasten them to the board. Anyone have another idea? I hesitate to open the rig up, as I have the sub-rcvr installed and my 80 year old fingers have problems inserting the cursed TMP plugs.
Vy 73 de Bob DJ0RD/WU5T
From: Bob DeHaney <
[hidden email] <mailto:
[hidden email]> >
Sent: Thursday, 15 October 2020 15:00
To: '
[hidden email]' <
[hidden email] <mailto:
[hidden email]> >
Subject: K3S filter Problem
I have installed an additional 400Hz and 200Hz Filter in my main receiver. When I switch them in line, they both act as if open. I see the signal on my P3 (strong Russian!!) but no audio. I have configured them correctly I believe. Could both be defective? I have set gain at 4db and 6db respectively, no change.
Vy 73 de Bob DJ0RD/WU5T
______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.htmlMessage delivered to
[hidden email]
Locked
