Hi Steve
Yes that 30-80 module was a bit tricky but was nice to have. I have about
69ma on 80 meters in receive but not sure what to advise. There are some
pretty sharp guys on here that may have some ideas but thought I'ld let you
know what readings I had.
I also found the atu was a bit touchier than the K1,K2 but with some
patience it would work great.
Werner N8BB
KX1 sn 1656
-----Original Message-----
From:
[hidden email]
[mailto:
[hidden email]]On Behalf Of Steve Watkins
Sent: Saturday, May 19, 2007 1:10 AM
To:
[hidden email]
Cc: Watti
Subject: [Elecraft] KX1 High Current
Just completed the 3080 module...more challenging than the KX1 itself. I am
experiencing higher current on 80 meters than the manual suggests (65 ma)..
I'm seeing 106 ma. This is with the board on the bench, not in the case.
I've noted at other places in my Elecraft building experience that the
recommended current in the manual has been lower than what is ammended
through discussion and errata's ?? Is 106 ma acceptable?
Receive on 20 and 40 seem fine.
Thanks, Steve
_______________________________________________
Elecraft mailing list
Post to:
[hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/subscribers.htmElecraft web page:
http://www.elecraft.com_______________________________________________
Elecraft mailing list
Post to:
[hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help:
http://mailman.qth.net/subscribers.htmElecraft web page:
http://www.elecraft.com
Locked
