Elecraft › [K3]

FW: P3 MKR SOLVED

Classic

List

Threaded

2 messages Options

Gary Ferdinand

FW: P3 MKR SOLVED

It is too embarrassing to tell. Tnx for reading :)

> -----Original Message-----
> From: [hidden email] [mailto:elecraft-
> [hidden email]] On Behalf Of Gary Ferdinand
> Sent: Thursday, September 23, 2010 12:33 PM
> To: Elecraft
> Subject: [Elecraft] P3 MKR off freq?
>
> I'm sure this is "user error," but so far this user fails to figure it
> out.
> This started happening right around the time I loaded the current
> firmware
> into both the K3 and the P3. When I tune or recall a memory in the K3,
> the
> P3 correctly displays the frequency and it appears to be centered
> within the
> brackets on the smallest scan. However, when I use either marker and
> line
> it up with a signal off the current K3 frequency and tap select on the
> P3,
> the end result on the K3 is off about a KHz and this also shows up on
> the P3
> - ie the signal I thought I put the marker on is now showing up down
> from
> current frequency.
>
> Any ideas? Yes, I have calibrated the P3 according to the instructions
> on
> p19 of the manual, and the transceiver settings are unchanged and
> specify
> K3.
>
> Thanks in advance.... Gary W2CS
>
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html

Bill K9YEQ

Re: FW: P3 MKR SOLVED

Gary,

Tell us as one of us may do the same thing. God knows I've done a bunch of
goofy things and try to figure them out.

Bill
K9YEQ

-----Original Message-----
From: [hidden email]
[mailto:[hidden email]] On Behalf Of Gary Ferdinand
Sent: Thursday, September 23, 2010 12:51 PM
To: Elecraft
Subject: [Elecraft] FW: P3 MKR SOLVED

It is too embarrassing to tell. Tnx for reading :)

> -----Original Message-----
> From: [hidden email] [mailto:elecraft-
> [hidden email]] On Behalf Of Gary Ferdinand
> Sent: Thursday, September 23, 2010 12:33 PM
> To: Elecraft
> Subject: [Elecraft] P3 MKR off freq?
>
> I'm sure this is "user error," but so far this user fails to figure it
> out.
> This started happening right around the time I loaded the current
> firmware into both the K3 and the P3. When I tune or recall a memory
> in the K3, the
> P3 correctly displays the frequency and it appears to be centered
> within the brackets on the smallest scan. However, when I use either
> marker and line it up with a signal off the current K3 frequency and
> tap select on the P3, the end result on the K3 is off about a KHz and
> this also shows up on the P3
> - ie the signal I thought I put the marker on is now showing up down
> from current frequency.
>
> Any ideas? Yes, I have calibrated the P3 according to the
> instructions on
> p19 of the manual, and the transceiver settings are unchanged and
> specify K3.
>
> Thanks in advance.... Gary W2CS
>
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net Please help support this email
> list: http://www.qsl.net/donate.html

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html