Posting on behalf of Manuel LU5OM who is currently having difficulty posting
to the reflector.
-------------------------------------------------------------
Hello everyone.
I need to get in touch with someone using a K2 + MICROHAM USB INTERFACE +
N1MM + LOGGER32...I have MICROHAM cable set for the K2 but I do not
understand the J5 connection (I believe its inside the K2)...I hooked up
everyhting yesterday but the K2 does not transmit. I downloaded the Router
software, checked every step and all was fine but no keying. The WINKEY
(inside Microham) is working fine but the K2 does not go on transmit. One
cable marked J5 (with a stereo 3.5 mm) is not connected anywhere. I don´t
know if that is the loosing piece.
I will be doing CW contesting with N1MM, general logging with LOGGER32 (SSB,
CW and RTTY).
Thank you for your help.
Manuel
LU5OM
CT4IK
K2/100 # 5310
PS - By the way for those (like I was) who are still in doubt about SSB with
the K2... I finally followed Don's suggestion (W3fpr) and plugged in all
microphone jumpers. I decided on the Kenwood MC43S mike, plugged it in and
it works like a charm. It is troublesome not to have a monitor for your SSB
audio (I don´t have any other radio) but people are generally very helpful
on the air.
_______________________________________________
Elecraft mailing list
Post to:
[hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help:
http://mailman.qth.net/subscribers.htmElecraft web page:
http://www.elecraft.com
Locked
