FW: RE: K2 4039, Failing transmitter tests

classic Classic list List threaded Threaded
1 message Options
Reply | Threaded
Open this post in threaded view
|

FW: RE: K2 4039, Failing transmitter tests

Dan Barker
The "Elecraft" display is also generated if the PS shuts down (due to
excessive current) and drops off for a bit (I have a 3A supply with a
current adjust - It works fb with my K2 unless I forget to reset the current
limit back to 3. I often set it to 1 to charge LiPo batteries or do other
bench work - The first dit resets the PS and the K2).

Sounds like you already found your problem, but the "Elecraft" display can
be just a symptom of the PS dropping off.

Dan / WG4S / K2 #2456

<snip>
the output limiter on the PSU flicks in cutting the power briefly and
Elecraft displays on the K2.
</snip>

_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft    Help:  http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com