Feature request for XVn IF parameter value list

classic Classic list List threaded Threaded
2 messages Options
Reply | Threaded
Open this post in threaded view
|

Feature request for XVn IF parameter value list

Vincenzo Capuano

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Reply | Threaded
Open this post in threaded view
|

Re: Feature request for XVn IF parameter value list

Vincenzo Capuano
  With the text this time:

I would like to use the K3 with a VLF-LF converter that converts from
10-500 kHz up to 3.5-4.0 MHz.

In order to be able to see the correct frequency selected on the K3
display, i.e. 10-500 kHz, I was thinking to connect the converter to the
XVTR IN (receive only) and configuring the XVn RF to zero and the XVn IF
to 3.5 MHz.

But, I understand that the XVn IF parameter does not accept 3.5 MHz
value, as it only accepts 7, 14, 21, 28, and 50 MHz.

Is this something that could be easily added to a future firmware
release? Or are there any workarounds?

--
73, Vincenzo - IZ0RUS

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html