Currently, the K3 allows transverter IF's of 50, 28, 21 and 7 MHz. When
running a large multiop that uses transverters for all bands, care must be
taken to keep IF's away from each other to avoid QRMing your own stations.
Since almost all the commercially available transverters use a 28 MHz IF,
you run out of choices pretty quickly (even using 27 MHz as an IF). If 25
MHz could be added to the available transverter IF list, it would help
immensely!! Most of the transverters can be re-crystaled and the output
bandpass at 28 MHz can be re-aligned or is already broad enough to allow 25
MHz through.
Thanks for the consideration!!
Terry Price - W8ZN
K8GP - The Grid Pirates Contest Group
______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.html
Locked
