Finger Dimple For Sale ;-)

[Roger Stein]

Good evening Elecrafters,
I have for sale a very nice finger dimple.......for $1150.00!
Attached and included with this finger dimple are the following:

K2 #755
K160RX
KSB2
KNB2
KPA100
KAT100-1

This K2 has been updated to the current K2 configuration regarding
Firmware levels, K2 Keying Bandwidth Mod Kit, K2 Temperature Compensated
PLL Reference Upgrade, K2 BFO Toroid & PLL Ref Osc Xtal Upgrade,
Matched Filter Crystals (14), 2nd Filter Upgrade for the K2,
KSB2 Wider Bandwidth Capacitor Kit (2.4) and others.

This package will also include the K2 Mini Reference manual, the N-Gen
for aligning the filters to widths other than are presently set up,
all manuals in a 3-ring binder with various application notes from
many years of the Reflector, interconnecting cables, N0SS tuning
incicator, and power supply cables, (yes, some with power-pole hardware)
;-).

I might add that the main tuning knob has a matching, wide, black rubber
band for softening the edges.(I have a couple of extra if anyone is
interested)

Shipping can be by UPS or USPS, insured to your 'ham-shack'. This will
be from zip 98563.

This has been a tough message to write.......but.....a K2+1 is a glimmer
in the eyes in Aptos!

73, Roger WA7BOC
Montesano, WA

_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft   

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com

[Roger Stein]

>Good evening Elecrafters,
>I have for sale a very nice finger dimple.......for $1150.00!
>Attached and included with this finger dimple are the following:

>K2 #755
>K160RX
>KSB2
>KNB2
>KPA100
>KAT100-1

>This K2 has been updated to the current K2 configuration regarding
>Firmware levels, K2 Keying Bandwidth Mod Kit, K2 Temperature Compensated
>PLL Reference Upgrade, K2 BFO Toroid & PLL Ref Osc Xtal Upgrade,
>Matched Filter Crystals (14), 2nd Filter Upgrade for the K2,
>KSB2 Wider Bandwidth Capacitor Kit (2.4) and others.

>This package will also include the K2 Mini Reference manual, the N-Gen
>for aligning the filters to widths other than are presently set up,
>all manuals in a 3-ring binder with various application notes from
>many years of the Reflector, interconnecting cables, N0SS tuning
>incicator, and power supply cables, (yes, some with power-pole hardware)
>;-).

>I might add that the main tuning knob has a matching, wide, black rubber
>band for softening the edges.(I have a couple of extra if anyone is
>interested)

The extra rubber bands have been spoken for, thanks to those who replied!!

To the K2 package above, please add the XG-1.

73, Roger
WA7BOC


_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft   

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com

[AJSOENKE]

Very Witty!  The thought then struck me!  I have about 3 old rigs  (Yausu
etc) that I deemed not worth enough to sell that had pretty nice tuning  knobs on
them. I pulled a couple and found to my delight that not just one, but  two
had very nice knobs - counterweighted and "dimpled" - that fit the K2  
geometry.  I'm still debatingh if i want to make the swap, but it's food  for thought
for those who are looking for a way.
 
Al WA6VNN  



************************************** Get a sneak peek of the all-new AOL at
http://discover.aol.com/memed/aolcom30tour
_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft   

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com