Firmware glitch?

[Gary Auchard]

My KX3 has just been upgraded to the latest firmware and all seems to be working fine except in two areas.  Whenever I'm in the SSB mode the AGC - S does not show up on the display.  I have the SSB mode setting set for Slow but can't get it to show that on the display.  It just shows AGC -. The second problem I'm having concerns the KXAT3.  When I tell the ATU to go into a tune mode on 10 meters the radio shuts off totally.  I'm loading into a known good Mosley TA-33 beam antenna.  The radio works fine on 15 and 20 meters on this antenna and I've checked the antenna and all is fine. Anyone know why these problems are happening? Other than that, I love this little radio and Elecraft hit a home run with the bases loaded on this one.  My serial number is 564 and it was a kit radio. Thanks, Gary A. - W0MNA
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Lyle Johnson]

Gary,

While in SSB mode, go to MENU:AGC MD and set it ON.  The symptom you
describe suggests your radio has AGC SPD set to SLO, but in SSB the AGC
MD is set to OFF.

73,

Lyle kK7P

> My KX3 has just been upgraded to the latest firmware and all seems to be working fine except in two areas.  Whenever I'm in the SSB mode the AGC - S does not show up on the display.  I have the SSB mode setting set for Slow but...
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html