I've sent a note to support, but anyone offhand know what E 000202 in the A display combined with ERR DSE in the B display might imply about why firmware won't load? I know that ERR DSE means a missing echo from a DSP command.
Right now K3 Utility appears to communicate fine with the radio, but nothing will load, not MCU, FP, etc. I don't think I have a USB/232 issue -- uploaded a lot of new firmware over the past couple of years, and this is the first problem. The radio is detected properly and loads seem to progress, but fail at verification. Can't get past MCU at this point. Forcing the load doesn't help. Radio is dead, except for a periodic "thump" in the audio and occasional crackling.
Grant/NQ5T
______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.html
Locked
