I too, experienced some issues. Be sure you are using the latest utility.
Not all USB to Serial converters are made equal. I have also found that
connectors and make of adapters have impacts. Oh, then let's add in the age
of your OS installation.
When I get errors, if it doesn't load. Load again using only newer
software. Seems to get through it for me.
Good luck.
73,
Bill
K9YEQ
-----Original Message-----
From:
[hidden email]
[mailto:
[hidden email]] On Behalf Of Keith
Sent: Tuesday, December 15, 2009 6:10 PM
To:
[hidden email]
Subject: [Elecraft] Firmware loading
I loaded the newest firmware into my K3 sucessfully tonight. However I see a
lot of retries during the FPF part of the firmware load. Is this normal? I
am using an RS232 cable and COM1(38000,N,8,1). Everything loaded OK but I
was wondering if I may have a wrong setting somewhere? 73
Keith Hamilton W8GX
______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.html______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.html
Locked
