Firmware version question: K2

[k7gt]

I have firmware 2.04/1.09 in my K2. As I am contemplating getting the
K60XV mod kit to allow my K2 to use low-level signals to interface with
an
XV144, I have checked out the K60XV order page. An item  FWSSB is shown
there stating that it is needed to use SSB with low-level transverter
interface.
Are not these features already in firmware 2.04/1.09??

Allan K7GT
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Don Wilhelm-4]

Allan,

No - that caution is referring to the firmware IC on the KSB2 board.  
You will need 1.08

73,
Don W3FPR

On 4/8/2012 2:52 PM, [hidden email] wrote:

> I have firmware 2.04/1.09 in my K2. As I am contemplating getting the
> K60XV mod kit to allow my K2 to use low-level signals to interface with
> an
> XV144, I have checked out the K60XV order page. An item  FWSSB is shown
> there stating that it is needed to use SSB with low-level transverter
> interface.
> Are not these features already in firmware 2.04/1.09??
>
> Allan K7GT
>

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html