A message from N5DG gave me the tip I needed. As had been suggested
earlier to me, I had tried the Yaesu setting on the amplifier menu. When
you bring up Yaesu on the SBE menu it asks for what rig and lists a
number of their radios - and at the bottom of the list - which I did not
notice until N5DG pointed me at it - an entry for "Band Data". I set to
that and voila! It works exactly as expected.
My early impressions of the amp are very good. The manual is
"difficult" but once you ave waded through that and get it going it is
very nice. It effortlessly puts out 1500 watts with about 30 watts of
drive. The fan noise is blessedly low until you transmit; then the fan
speeds up but as soon as you stop transmitting it drops to low again
presuming the temperatures are OK. So far they have been.
Again, thanks to ED, N5DG and to all on the relector.
Cheers/73
Bob W9KNI
______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.html
Locked
