I was not pleased with the original Elecraft supplied power cord either. I replaced it and never looked back.
Sent from my iPhone
...nr4c. bill
> On Sep 7, 2020, at 11:03 PM, Terry Brown <
[hidden email]> wrote:
>
> I first want to thank all those who responded to my post. In a follow up email it was suggested that I check for voltage drop in the Elecraft 12v fused power cord.
>
> Sure enough, at key down, voltage dropped from 14v to 10.5v. I connected a 10ga power cord directly from my PS to the amp. Voltage at key down was 13.72 volts and the amp put out full power.
>
> Time to troubleshoot the fused power cord!
>
> 73,
>
> Terry, N7TB
> ______________________________________________________________
> Elecraft mailing list
> Home:
http://mailman.qth.net/mailman/listinfo/elecraft> Help:
http://mailman.qth.net/mmfaq.htm> Post: mailto:
[hidden email]
>
> This list hosted by:
http://www.qsl.net> Please help support this email list:
http://www.qsl.net/donate.html> Message delivered to
[hidden email]
______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.htmlMessage delivered to
[hidden email]
Locked
