Followup - KDSP2's Primary Menu - K2 s/n 549

[Bill Scurlock]

Thanks to Lyle, Bob, and Jim - I now understand the E13.1  0.40 message -
Thanks.  Everytime I tap the DISPLAY button, the display goes straight to
the voltage and current readings and bypasses the DSP menu.  The second tap
returns to the frequency display.

Lyle, you understand my DSP access problem, but what do you mean by "drill
down to the K2's real time clock menu item and turn it on"?   The manual
indicates to me that I have to be in the DSP Menu before I can access any of
the DSP functions which includes the clock - and I can't get into that menu.

Page 38 of the manual indicates that I have lost synchronization, but
turning off and on the K2 does not clear the problem.

Maybe I need to go back inside and reseat the boards.  Any other thoughts?
Thanks.

Bill, K5GCW


_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft   
Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com

[KK7P]

> Lyle, you understand my DSP access problem, but what do you mean by "drill
> down to the K2's real time clock menu item and turn it on"?  

The K2 (not the KDSP2) must have the real time clock display enabled for
you to see the KDSP2 menus.  See "Initial Checkout" on page 18 of the
KDSP2 manual for instructions on how to enable this feature on your K2.

73,

Lyle KK7P

_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft   
Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com