For Sale Factory Updated K3 #75

[Roger K7SJ]

Attention Canadian and US licensed amateur radio ops, for your
consideration is K3 #75. This unit was updated with the K3SYNA synthesizer
board, KXV3B I/O pre amp board, and NEOGRIP tuning knob ring. The gold
plated header pin replacement was
completed by Elecraft in Watsonville in June 2017.

Includes KPA3 100 watt PA, KAT3 ATU, KBPF3 Gen Coverage RX Bandpass module
and five roofing filters. 6.0 hz, 2.7 hz, 1.8 hz, 700 hz (Inrad) and 500 hz.

The DSP board upgrade has also been done.

An Elecraft Heil MD2 microphone and stand, KSUB firmware upgrade cable, all
manuals and update documentation are included.

This is a one owner, non-smoking environment transceiver. The unit will be
shipped in a factory box, the one supplied from the upgrade.

But wait, there's more! Also in the package is a P3 (2014) and SVGA board
with all necessary cables, documentation. This will be double boxed for
shipping.

Price $2400 USD, does not include shipping.  Current location is Halifax,
NS.

Please reply off list to burch dot craft at gmail dot com to arrange for
photos and a landline from me to discuss.

PS....I have an LP-Pan and Emu 0200 with all cables and documents as well
for $150 USD for the pair.

Reason for sale, cleaning the shack.

73, Roger VE1/K7SJ
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

[Roger K7SJ]

This K3/100 #75 is spoken for.

73, Roger VE1/K7SJ

On Mon, Jan 15, 2018 at 3:33 PM, Roger Stein <[hidden email]> wrote:

> Attention Canadian and US licensed amateur radio ops, for your
> consideration is K3 #75. This unit was updated with the K3SYNA synthesizer
> board, KXV3B I/O pre amp board, and NEOGRIP tuning knob ring. The gold
> plated header pin replacement was
> completed by Elecraft in Watsonville in June 2017.
>
> Includes KPA3 100 watt PA, KAT3 ATU, KBPF3 Gen Coverage RX Bandpass module
> and five roofing filters. 6.0 hz, 2.7 hz, 1.8 hz, 700 hz (Inrad) and 500 hz.
>
> The DSP board upgrade has also been done.
>
> An Elecraft Heil MD2 microphone and stand, KSUB firmware upgrade cable,
> all manuals and update documentation are included.
>
> This is a one owner, non-smoking environment transceiver. The unit will be
> shipped in a factory box, the one supplied from the upgrade.
>
> But wait, there's more! Also in the package is a P3 (2014) and SVGA board
> with all necessary cables, documentation. This will be double boxed for
> shipping.
>
> Price $2400 USD, does not include shipping.  Current location is Halifax,
> NS.
>
> Please reply off list to burch dot craft at gmail dot com to arrange for
> photos and a landline from me to discuss.
>
> PS....I have an LP-Pan and Emu 0200 with all cables and documents as well
> for $150 USD for the pair.
>
> Reason for sale, cleaning the shack.
>
> 73, Roger VE1/K7SJ
>

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]